Error 42000 Microsoft Odbc Visual Foxpro Driver Syntax Error

Posted on by
Error 42000 Microsoft Odbc Visual Foxpro Driver Syntax Error 10,0/10 6851votes

Hi First of all, I would like to confirm my understanding of your issue. From your description, I understand that you're getting an error 'Driver does not support this function' when trying to connect to a FoxPro database using ODBC DSN-less connection. If there is any misunderstanding, please feel free to let me know. Based on my experience, this might be a driver issue. Please try to download and install the latest ODBC driver for Visual Foxpro. And make sure that you have had the latest version of MDAC installed.

The can be downloaded from the following links: Foxpro ODBC driver is at the bottom of the page a9e0-3a1afbd5922e&DisplayLang=en HTH. Kevin Yu ======= 'This posting is provided 'AS IS' with no warranties, and confers no rights.'

Hi, If it ran successfully the second time, I would agree with Nigel. Depending on what version of SQL you're running, there was a bug and subsequent service pack to fix it, but I can't remember the version off the top of my head. I think it was 2005 SP3, but I'm not 100% certain. I would still suggest running the checkdb, but if that comes back clean, try to bring your SQL Instance up to the latest service pack level. Thanks, StephenPlease click Mark as Answer if you found my post helpful.

[42000] [Microsoft] [ODBC SQL Server Driver]. ERROR [42000] [Microsoft] [ODBC SQL Server Driver]. Must Declare The Scalar Variable Error In Microsoft Visual. Database Connection Error. In Crystal Reports XI Developer I get the above error. Database Connection Error: '42S02:[Microsoft][ODBC Visual FoxPro Driver].

Thanks, Stephen. HI, We are using two restoring job everyday first restoring job getting failed the below given error message some time were succeed two job'sCannot open backup device backupfile.

Operating system error 1265(The system detected a possible attempt to compromise security. Please ensure that you can contact the server that authenticated you.). [SQLSTATE 42000] (Error 3201) RESTORE DATABASE is terminating abnormally. [SQLSTATE 42000] (Error 3013). NOTE: The step was retried the requested number of times (1) without succeeding. The step failed we have restarted the server after that only we are facing the above problem kindly give solution me tks.

I have the following script which runs on Windows 2003 server with SQL 2008 and merges data from a SQL 2000 server, the script runs fine for a few weeks thenI receive notification e-mails that the job has failed. I am preparing an SQL query that calls a stored procedure. The Query has an OUPUT parameter that I'm trying to map to a local variable in my application that is written in C. The query looks like(names changed to protect the guilty): execute StoredProc 'String1', String1', 'String3', 'String4', 1, 19, 0, 'String5', 'String6', 'String7', 'O', FALSE, ', ', 0, 0, 0, ', ', ', ', ', ', 0,?; The call to SQLPrepare() is successful.

I then call sqlr = SQLBindParameter( pCtrl-hStmt, 1, SQL_PARAM_OUTPUT, SQL_C_SSHORT, SQL_INTEGER, 0, 0, iReturn, 0, fileLen ); and that returns a success code so I think I'm good to go. When I call SQLExecute() it returns the following diagnosis records: The state is [42000] the native error is [102] [Microsoft][ODBC SQL Server Driver][SQL Server]Incorrect syntax near ','. The state is [42000] the native error is [8180] [Microsoft][ODBC SQL Server Driver][SQL Server]Statement(s) could not be prepared. I've tried with and without the semicolon and a number of other formats but nothing seems to match.

Also looking at the ODBC logs, the driver doesn't seem to be making the substitution of the marker with the value in iReturn as I would expect. Any ideas what I could be doing wrong?

I was creating a sproc which takes a input parameter and generates out put as xml file. I am getting the error as i put the input parameter. It runs file without input parameters. Unable to start SQL Agent SQL Server 2008 R2 Error logs Date,Source,Severity,Message 08:19:12,,Information,[098] SQLServerAgent terminated (normally) 08:19:12,,Error,[298] SQLServer Error: 15247c/ User does not have permission to perform this action.

Error 42000 Microsoft Odbc Visual Foxpro Driver Syntax Error

[SQLSTATE 42000] (DisableAgentXPs) 08:19:11,,Error,[000] Error creating a new session 08:19:11,,Error,[298] SQLServer Error: 229c/ The INSERT permission was denied on the object 'syssessions'c/ database 'msdb'c/ schema 'dbo'. [SQLSTATE 42000] 08:19:11,,Error,[298] SQLServer Error: 229c/ The EXECUTE permission was denied on the object 'sp_sqlagent_get_startup_info'c/ database 'msdb'c/ schema 'dbo'. [SQLSTATE 42000] 08:19:11,,Error,[298] SQLServer Error: 229c/ The EXECUTE permission was denied on the object 'sp_sqlagent_has_server_access'c/ database 'msdb'c/ schema 'dbo'. [SQLSTATE 42000] (ConnIsLoginSysAdmin).

I am running through some testing with adding, modifying, and removing drives and the first test I attempted failed. I tried to expand the C: drive on a deployed Windows 2012 server and it accepted my request to bump it up by 10GB and now I am stuck with it in the state 'On (Reconfigure.Scheduled)'. I have no action available to execute the change I only have the option to cancel. If I select cancel it fails with the error: Status Failed Status Details Exception during request callback with id a6f3c971-a6e4-48dd-a9b18af for item c5e3a65a-42b5-4c67-a8d3-bab31b2c7793. Error Message: [Error code: 42000 ] - [Error Msg: Infrastructure service provider error] Anyone know what is going on here. This should be a totally valid change. Getting this error when using DW CS3 Insert Record Wizard with CF8 and MySql 5 quote: Error Executing Database Query.

Taking into consideration your error message I assume you have a standalone database created on the file system. It is not hooked up to the SQL Server service so you can't BCP anything into it using that command line.

Error 42000 Microsoft Odbc Visual Foxpro Driver Syntax Error

You might want to find that database on the file system. It is usually located in App_Data folder of the project (if this is an ASP.NET application). Once you spot it just attach it to SQL Server instance and run your command again. Here's an info on how to attach a database to SQL Express instance: http://msdn.microsoft.com/en-us/library/ms165673.aspx. We have had this problem couple of times. Re-creating the maintenance plan works most of time but you should reserve this option as the last choice.

You may want to review what you have modified on this maintenance plan and associated databases, e.g. After you deleted a database whereas that database record still exists in the plan. The log record also helps you to figure out what has been done to this plan. After reviewing all possible actions that could have done to this maintenance plan but you still cannot figure out what happened, re-creating the plan may be the solution to the problem. I think reason is because its using same value as filename always for creating the backup and hence failing when one exists already.

Try making name dynamic by appending timestamp (date/time) information to it see this example Mark This As Answer if it helps to solve the issue Visakh ---------------------------- https://www.facebook.com/VmBlogs. Hi All, How to resolve this issue Possibly tempdb out of space or a system table is inconsistent. Check previous errors. [SQLSTATE 42000] (Error 8921) Unable to read and latch page (1:10498224) with latch type SH. Latch failed. [SQLSTATE 42000] (Error 8966) CHECKDB found 0 allocation errors and 1 consistency errors not associated with any single object.

[SQLSTATE 01000] (Error 8954) CHECKDB found 0 allocation errors and 1 consistency errors in database '. [SQLSTATE 01000] (Error 8989). The step failed.

Is there any data loss. I already pointed out in other thread you posted did you looked at message DBCC CHECKDB (dwanz) WITH no_infomsgs executed by ramco found 1 errors and repaired 0 errors.

Elapsed time: 2 hours 13 minutes 53 seconds. Internal database snapshot has split point LSN = 000238cb:000102fd:0003 and first LSN = 000238cb:0000c29b:0001. This lets me believe that there is some issue with SAN, HBA, cards etc can you please involve SAN team to double check not only SAN but HBA, switches, Cards whatever is involved in SAN and its connection to SQl server. Can you run checkdb again on database dwanz Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it My Technet Articles. Hello, wenn i access my Plesk Panel via Internet Explorer i get the following Error: The Version of the Plesk Panel is 11.5.30 ERROR: Zend_Db_Statement_Exception SQLSTATE[42000]: Syntax error or access violation: 1286 Unknown table engine InnoDB Ich get the same error if i restart the PSA Service: Starting psa.

* Starting Plesk engine pool manager sw-engine-fpm.done. Done ERROR 1286 (42000) at line 1: Unknown table engine InnoDB Have anybody an idear why this happens and how can i fix it. Platform Windows 2003 and SQL Server 2008 Standard Edition. I used the Import/Export Wizard to Import Data from another database on this server. The Wizard works and I saved it as a file.

I set up a job with the following command to execute the saved file: dtexec /file C: SQLFile Imp001CoProsp.dtsx I get the following error: Executed as User: NT Authority System. Incorrect syntax near '/' [SQLState 42000] (error 102) I have other jobs that have been running for months that aren't Import/Export jobs. I just can get this Import/Exort one to run. What am I missing??? What was the job NAME that ran successfully?,Sounds like you were trying to create the job that already exists?

Can you create a job under a different name? Hi Jai, I have created a new Job with diff name,When am trying to start the job at first time its succeeded but when i try to start the job at next time its throwing the same error like The specified @name('xxxx') already exists. [SQLSTATE 42000] (Error 14261). The step failed Can you pls give me some resolution for this issue. Thanks in Advance Chowdary.

Estoy haciendo un backup automtico localmente todos los das y las 3 primeras bases las backupea ok pero el resto no las hace. Quiero aclarar que tengo espacio en el disco. Me tira el siguente error en sql:Executed as user: dominio SqlServerAgent. Cannot open backup device 'c:/Back_BASES/Bd_base.BAK'. Device error or device off-line. See the SQL Server error log for more details.

[SQLSTATE 42000] (Error 3201) BACKUP DATABASE is terminating abnormally. [SQLSTATE 42000] (Error 3013). NOTE: The step was retried the requested number of times (5) without succeeding. The step failed. Y en visor de sucesos este error: Suceso 17055, origen mssqlserver, Error 3041. Backup failed to complete the command backup database Bd_Base to disk ' c:/Back_BASES/Bd_Base.bak' with init, stats =10 Pido que me ayuden por favor!!!!!!!!!

MUCHISIMAS GRACIAS!!!! :-) Hola, Una pregunta: Ests usando el proveedor ODBC slo por si cambia la ubicacin de la BD?:-/ Te das cuenta de que ests renunciando a un montn de ventajas y a la vez ests perdiendo rendimiento?

Y slo por si cambia la ubicacin de la BD? Creo que deberas plantearte seriamente si utilizar el provedor SQL nativo. Te ahorraras un montn de problemas, y ganaras rendimiento. Que cambia la ubicacin de la BD? Puedes cambiar a mano la ruta del servidor en el fichero app.config, o puedes incluso cambiarlo por cdigo desde tu aplicacin.

A ver si saco unos minutos y publico un pequeo post al respecto. Saludos,No olvides marcar la respuesta como correcta si te ha sido de utilidad:-) [MS-MVP-MCTS] Mi Perfil MVP en: NUG: Web: Blog: Geeks: http://geeks.ms/blogs/lfranco.

Is your DB online now? Check the sql log and it will tell you how far it's done and how much left to go? If the database is not online, Try this ALTER DATABASE forecast SET ONLINEGO-- this should try to run recovery, fail and put the database into SUSPECT or RECOVERY_PENDINGALTER DATABASE forecast SET EMERGENCY GO-- this should work after the step aboveYou'll then need to put the database into SINGLE_USER mode as well before running repair. If this doesn't work, can you post the results from:SELECT state_desc FROM sys.databases WHERE name='forecast' Thanks, Leks. Hello, Anet helpmsg 5, the message returned is Access is denied. Somewhere whatever is being run is being denied access to an OS resource (though it could be a database resource).

Verify any files or folders on the OS level have the correct permissions for the SQL Server Service account (since you said maintenance plan) as well as checking who owns the job and making sure the owner of the job (not the plan, but the job) has access to any databases that may be touched. It's a rights issue, now we just have to find out where. Edit: Make sure the job owner actually exists as well! -Sean Sean Gallardy, MCC Blog. It looks like that Impersonation Information for the data source is Use the Service Account, but analysis service runs under NT AUTHORYTHY account that does not allow access to database computer.

There are several ways to fix this, one of them is to change account for analysis service. Try this: 1) Go to Services Management Console (Start-Run-services.msc) search for SQL Server Analysis Service (INSTANCE_NAME), most likely instance name will be MSSQLSERVER. 2) Change Lon On properties for this service to a user that has access to machine that has database. 3) Restart Service. It should start if supplied credentials are valid for running a service 4) Re-connect to the server in Management Studio (or other client you use) 5) Process the cube Nick. Hi all, Source(Flatfile)-----------Target(Teradata table).Using IKM--------Teradata Control Append and LKM-----File to SQL.

One to one mapping. Error: 706: 42000: com.teradata.jdbc.jdbc_4.util.JDBCException: [Teradata Database] [TeraJDBC 12.00.00.110] [Error 3706] [SQLState 42000] Syntax error: Column name list longer than value list. Com.teradata.jdbc.jdbc_4.util.JDBCException: [Teradata Database] [TeraJDBC 12.00.00.110] [Error 3706] [SQLState 42000] Syntax error: Column name list longer than value list. Please do the needful Regards Suresh. Hi seniors, I am running sql server 2005 under details Microsoft SQL Server 2005 - 9.00.3033.00 (X64) Copyright (c) 1988-2005 Microsoft Corporation Standard Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 1) When i attempt to take differentail backup i receieved following message Cannot perform a differential backup for database abc, because a current database backup does not exist. Perform a full database backup by reissuing BACKUP DATABASE, omitting the WITH DIFFERENTIAL option. [SQLSTATE 42000] (Error 3035) BACKUP DATABASE is terminating abnormally. [SQLSTATE 42000] (Error 3013).

When i search this msg on net than i find that it is microsoft bug 863 so i found hotfixes about this problem and tried to install but unable to install (On installation screen select feature i am unable to click on check box) Can any one help me regarding to this issue.And more is. Full back of db abc exists and i never changed its location nor rename file name. Hello, I'm having trouble running jobs with my active directory (ADS) account. I've setup my SQL services to run under an ADS account, but jobs cannot seem to query ADS for user information. We're running Windows Server 2003 and SQL Server 2005 SP2.

Here is the error message: == The job failed. Unable to determine if the owner (ADS me) of job eFASRtest has server access (reason: Could not obtain information about Windows NT group/user 'ADS me', error code 0x5. [SQLSTATE 42000] (Error 15404)). == also this message in log: == [298] SQLServer Error: 15404, Could not obtain information about Windows NT group/user 'ADS me, error code 0x5. [SQLSTATE 42000] (ConnIsLoginSysAdmin) == I already tested the suggested: execute as login='ads me' and I get the same error on both (my local installations and production) appreciate your help.

Hi All, It's probably permissions' problem. The best way to solve this is detecting which account under Security Logins that has the db_owner permissions and map it to a user with enough permissions to perform the backups. That is for specific database you need to backup, probably the account permissions is changed if it's local, can be due to some application update or new install.

To solve the problem, the best of practice is mapping the account with db_owner to a local account with enough permissions (if backup is local) or to a domain backup operator (if backup is remote or network). Hopefully that helps! Hi 當我們使用perl來create Table時,遇到下面幾個問題. Hi 當我們使用perl來create Table時,遇到下面幾個問題. Good day.I'm having some trouble with a text import with a 'category' table, the one that is part of Microsoft's Northwind database. The text file contains a long (20-25k) text string that represents a picture. I've tried surrounding the picture data with single quotes and without the quotes.

With the quotes it gives me: SQLState: 42000 Message: ORA-01704: string literal too long without the quotes, it gives me the error: SQLState: 42000 ORA-00972: identifier is too long I use the program MakeDB, written by Cay Horstman in 1999, which reads a text file, the first line of which is the field names followed by the data type, separated by commas, and the following lines have the data rows. The program reads the entire line at a time, and does not parse the fields, but instead creates the table with the entire line, then adds the records using the entire line. I have posted the first and second lines of the file here (with the picture fielc truncated) to show how it looks. Any pointers would be very helpful. Tomnann@chartermi.net CategoryID INT,CategoryName VARCHAR(15),Description VARCHAR(75),Picture BLOB 1,'Beverages','Soft drinks, coffees, teas, beers, and ales,'151C2F00020000.0C7AD05FE'.

HI Guys.i cannt' understand what's going on the server. Actually i have created a two jobs for full backup for my databases. One is running perfect but one is giving me following error.

Can any one tells me where i m doing mistake. MessageExecuted as user: Domain user. Cannot open backup device 'Database_Full( 192.0.0.1 Backups FULL_Backups database_Full.BAK)'.

Operating system error 53(error not found). [SQLSTATE 42000] (Error 3201) BACKUP DATABASE is terminating abnormally. [SQLSTATE 42000] (Error 3013). The step failed.

Hi Nitin, ReadOnly=1/True means read only, Change it to ReadOnly=0/False to have a try. Two similar threads, see ODBC and Excel: Database or object is read-only. And Ye Olde [Microsoft][ODBC Excel Driver] Cannot update. Database or object is read-only. Issue If have no help, I think this error is related to ODBC Drive, you could paste this issue in the following forum.

I think you will get more help. Thanks,Vicky Song [MSFT] MSDN Community Support Feedback to us Get or Request Code Sample from Microsoft Please remember to mark the replies as answers if they help and unmark them if they provide no help. I am the beginner in ODI.I have the one package of Retail Anlaytics which is built using ODI.There is the Knowledge module of Oracle to Oracle DBLink used.There is use of Global variable called loading_tab_prefix.This value should pass the prefix i.e c$_0.But while using this KM it give #global.loading_tab_prefix that should be C$_Otablename. Error is 42000: java.sql.SQLException: ORA-00942: table or view does not exist ORA-02063: preceding line from RMSBATCH_DB In this below query generated it should create the view of C$_0W_EMPLOYEE_DS but it is generating #global.loading_tab_prefix0_W_E create or replace view RMSBATCH_TEST.#GLOBAL.LOADING_TAB_PREFIX0W_E ( C1_FULL_NAME, C2_EMPLOYEE_NUM, C3_CASHIER_FLG, C4_INTEGRATION_ID, C5_SALES_REP_FLG ) as select SA_EMPLOYEE.NAME, SA_EMPLOYEE.EMP_ID, SA_EMPLOYEE.CASHIER_IND, SA_EMPLOYEE.EMP_ID, SA_EMPLOYEE.SALESPERSON_IND fromRMS13DEV.SA_EMPLOYEE SA_EMPLOYEE where(1=1) Help me out.

Thanks in advance Edited by: Manish Subedi on Jul 24, 2012 5:16 AM. Thanks for the reply.What you mention below is correct.I have set the variable loading_tab_prefix but it is generating an error.Here the database server for source and target table is different. In source it is taking the variable and in target it is taking the variable value.I think it should be consistent.What may cause it. It is creating view from source i.e rms as taking #global.loading_tab_prefix. And while inserting in target which is another database server it is taking the value c$0_table_name. Give your valuable comments.

Hi, SQL Server is supported by TechNet. TechNet - SQL Forums TechNet - Forums TechNet - Where is the Forum For? ----------------------- You can get support for SQL application developement on MSDN.

MSDN - Forums MSDN - Where is the Forum For? Hope this helps. When using the Add Command feature and adding Parameters to the Command list from a SQL Stored Procedure. As soon as we populated the Parameter with the desired Selection (For Example: By Sales Order) we would received the below error. Error in compiling SQL Expression Database Connector Error:'42000:[Microsoft][ODBC SQL Server Driver][SQL Server][Incorrect sybtax near the keyword 'By'.[Database Vendor Code:156]' We found by changing the entry within the parameter field to include single quotes (for example: u2018By Sales Orderu2019) would resolve the issue and then the desired data pulled fwd onto the report. Hi SteveFrom the error message, it is clear that you received this error message because you have exceed the maximum number of tables that can be used in the SQL statement.The maximum number of tables that can be referred in a SELECT Transact-SQL statement is 256.

This limit is documented under the 'Maximum Capacity Specifications' section of the SQL Server Books Online. To overcome this issue, you can break the query so that a lower number of tables or views are referenced in the query.Hope this helps.RegardsPoonam Thorat. Hi, I'm getting this error message on the UpdateStasAllUserDB job that ran happily for over 1 Year. Server details: Microsoft SQL Server 2000 - 8.00.2187 (Intel X86) Mar 9 2006 11:38:51 Copyright (c) 1988-2003 Microsoft Corporation Enterprise Edition on Windows NT 5.2 (Build 3790: Service Pack 2) Job view history.sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029).

The step failed. Maintenance reporting text file says: [12] Database userdbname: Updating Query Processor Statistics (sampling 30 percent of the data). [Microsoft SQL-DMO (ODBC SQLState: 42000)] Error 3628: [Microsoft][ODBC SQL Server Driver][SQL Server]A floating point exception occurred in the user process.

Current transaction is canceled. Drop and recreating maintenance plan will work?? I'm hoping someone out there has a solution to this problem. I have a bunch of reports which I've converted from CR8.5 to CR2008 (SP2 + HotFixPack 2.7 Installed) Our server is currently running SCO UNIX OpenServer 5.0.7 with a C-ISAM Database serving our accounting software. Some of the more basic reports have converted with no problem (daily sales figures etc.), but some reports such as customised purchase orders, and complex sales histories etc.

Continue to have this problem. Note, all my reports functioned perfectly under CR8.5. This error occurs within seconds of executing the report.

FAILED TO RETRIEVE DATA FROM THE DATABASE Details: 42000:ERROR Syntax Error - Database Vendor Code: -1 After which, the winsock comms need to be reset. One example SQL query is as follows (on a report re-designing my purchase order for imported products. SELECT purchase_order.po_order_no, purchase_order_line.stock_code, purchase_order.po_backorder_flag, purchase_order_line.po_line_description, stock_master.stk_desc_line_3, stock_master.stk_description, stock_master.stk_desc_line_2 FROM (purchase_order_line purchase_order_line INNER JOIN purchase_order purchase_order ON (purchase_order_line.po_order_no=purchase_order.po_order_no) AND (purchase_order_line.po_backorder_flag=purchase_order.po_backorder_flag)) INNER JOIN stock_master stock_master ON purchase_order_line.stock_code=stock_master.stock_code. Generally we see this error when the new solution columns and tables were not properly created on install/migration. Do you have a column called 'mrSOLUTION_TYPE' in your MASTER37 table?

If not, we would need to run one or more scripts to correct the problem. You could try the following script, but if this doesn't work or if you are running into more errors it might be quickest to submit a support ticket so we can work through this directly.

Not having a full picture of your situation, I would first advise you to please be conservative and make a full backup of your database and footprints directories in case this script does not work as desired and you need to restore from backup. This script will make a modification to your database. Next, open a command window As Administrator and run through the following commands - update your system path as appropriate: CDc: FootPrints cgi set CMI=c: Footprintsc: Footprints bin Perl bin perl.exe MRcreateKBVoteTable.pl -m -gc -kb -t When the script is done, try going back to your homepage to see if that corrected the problem. I'm creating a report using Microsoft Visual Studio 2008 and my query union query works fine if I hardcode values in the query. However, when I try to use a parameters for the values in the query I get the error ERROR [42000] [Microsoft] [ODBC SQL Server Driver] [SQL Server] Must declare the scalar variable @CollID1.

ERROR [42000] [Microsoft] [ODBC SQL Server Driver] [SQL Server] Must declare the scalar variable @CollID2. I have declared the parameters, so I don't understand why I am getting the error. Hi Friends,We are using the xp_sqlmaint in SQL Job for integrity check and database backup backup however execute the first step (Database Integrity Chect) in job we are getting this below error: Microsoft (R) SQLMaint Utility (Unicode), Version??????Copyright (c) Microsoft Corporation. [Microsoft SQL-DMO (ODBC SQLState: 42000)] Error 55555: [Microsoft][ODBC SQL Server Driver][SQL Server]To connect to this server you must use SQL Server Management Studio or SQL Server Management Objects (SMO).Please provide the solution to fix this issue.

I am attempting to do a simple table copy from one DB to another on the same server using a job in Server Management Studio on SQL 2005. The command works when run under the Query window, however, when I input it into a job I receive the following error message in the job history: Date 9/30/2008 11:39:19 AMLog Job History (a) Step ID 1Server LONGHORNJob Name aStep Name fDuration 00:00:00Sql Severity 15Sql Message ID 102Operator Emailed Operator Net sent Operator Paged Retries Attempted 0 MessageExecuted as user: DENVERARTMUSEUM spdb_service. Incorrect syntax near 'Serenic_DAM Holdings Test, LLC$G_L Entry'. [SQLSTATE 42000] (Error 102) Incorrect syntax near 'Serenic_DAM Holdings Test, LLC$G_L Entry'. [SQLSTATE 42000] (Error 102) Incorrect syntax near 'Serenic_H Street Test, LLC$G_L Entry'. [SQLSTATE 42000] (Error 102) Incorrect syntax near 'Serenic_DAM Live Test$G_L Entry'. [SQLSTATE 42000] (Error 102) Incorrect syntax near 'Serenic_DAM Holdings Test, LLC$G_L Account'.

[SQLSTATE 42000] (Error 102) Incorrect syntax near 'Serenic_H Street Test, LLC$G_L Account'. [SQLSTATE 42000] (Error 102) Incorrect syntax near 'Serenic_DAM Live Test$G_L Account'. [SQLSTATE 42000] (Error 102).

The step failed. Problem Restoring Backup database in MSSQL 2000.I made a backup of one of my databases from one server and now I'm trying to restore to the production server (Clustering) using Enterprise Manager. I remote the server - launched Enterprise Manager and I select the restore from disk and I give the full path of a local drive in the server where the backup is located - when I clicked ok it first tells me: Unable to verify the existence of the backup file location. Do you want to use the backup file location anyway? If I answer Yes and OK it presents a error msg: Cannpt open backup device 'c.bak.

Restore database terminating - Microsoft SQL-DMO(ODBC SQLSTATE 42000). I have moved this backup around and I still get the same msg.

Rychu Peja Bragga Download Mp3. Can anybody help - need assistance ASAP - thank you. Excuse me for the reviving of the long abandoned topic, but I've see this question unanswered. I got this error message, too, and didn't solve this problem. Now I use the third-party SQL backup software. For me, it was the one viable solution. If this problem may be solved correctly using internal means, I will glad to see the solution in the future.

Again, I'm sorry for my too late comment. Hello Please raise a new question or start a new thread.Its really of no use posting on old thread Hope this helpsPlease mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers. Here are the OS and SQL server data points:Microsoft SQL Server 2008 (RTM) - 10.0.1600.22 (X64) Jul 9 2008 14:17:44 Copyright (c) 1988-2008 Microsoft Corporation Enterprise Edition (64-bit) on Windows NT 5.2 X64 (Build 3790: Service Pack 2)XP_CmdShell HAS been enabled via a facet and also progremmatically via TSQL just to hammer it home.Executing the following code in a stored procedure that is called by a SQL job: 'EXEC Master.XP_CMDSHELL 'fsutil volume diskfree ' + Char(@Drive) + ':'' Error FIRST returned in job step is as follows:Executed as user: MyDomain MyAcct. The EXECUTE permission was denied on the object 'xp_cmdshell', database 'mssqlsystemresource', schema 'sys'. [SQLSTATE 42000] (Error 229)I then tried granting the NT domain login execute right on xp_cmdshell in the Master DB.After doing this I recieved the error of:Executed as user: MyDomain MyAcct. The xp_cmdshell proxy account information cannot be retrieved or is invalid. Verify that the '##xp_cmdshell_proxy_account##' credential exists and contains valid information.

[SQLSTATE 42000] (Error 15153)The account being used for ALL of our SQL services is an NT Domain Admin account that has been granted SysAdmin rights on the server.It is also the same account that we use to run all of our SQL jobs.This job runs fine on all 50+ of our SQL 05 servers. Just not working on the 08 flavor.If any more details are needed, please let me know.Thanks All!

Hi JJKusch,In order to execute xp_cmdshell, either user should be a sysadmin or proxy account and password must be set using sp_xp_cmdshell_proxy_account.An excerpt from Books Online: When xp_cmdshell is called by a user that is not a member of the sysadmin fixed server role, xp_cmdshell connects to Windows by using the account name and password stored in the credential named ##xp_cmdshell_proxy_account##. If this proxy credential does not exist, xp_cmdshell will fail.You can also visit this link: you said that you needed to provide execute permission on xp_cmdshell to the user, that meant your user is not sysadmin.Regards,SumeshPlease Indicate (Mark as Answer) if a Post has Answered the Question.

And this posting is provided AS IS with no warranties, and confers no rights. I have a backup from an instance of SQL 2k and want to restore it to a different machine to run heavy reports on.

I am using Enterprise Manger, right click on the Databases directory, then All Tasks, Restore Database and try to do the restore but, every time I get this error. Could not create one or more files. Maha Sangram Movie Mp3 Song Download. Consider using WITH MOVE options to identify valid locations. RESTORE DATABASE is terminating abnormally. The error title is Microsoft SQL DMO (ODBC SQL State: 42000.The backup was on a D drive of the server and the restore is on a C drive of the server. I am changing the drive letter on the Options tab of the Restore box, but I still get this error. So how do I get this to work?

Hello everybody, I have been suffer from problem that 1. I can access the tape drive using NTBACKUP for database backup. But when i trying to open the Media contents (in SQL 2005, and try to open the backup device R3DUMP0) then it generate the error message 'cannot open the backup device 'R3DUMP0(. Tape0)', operating system error 2(the system cannot find the file specified)' 2. Hello, I tried to use the VSS restore to Rename the database. If I just used setselectedforRestore and then used SetRestoreOptions with New Component Name =logicalpath/new name, then the restore always fail at the post restore state.

Then I looked at the eventlog. I saw this: Sqllib error: OLEDB Error encountered calling ICommandText::Execute.

Hr = 0x80040e14. SQLSTATE: 42000, Native Error: 3013 Error state: 1, Severity: 16 Source: Microsoft SQL Native Client Error message: RESTORE DATABASE is terminating abnormally. SQLSTATE: 42000, Native Error: 3119 Error state: 1, Severity: 16 Source: Microsoft SQL Native Client Error message: Problems were identified while planning for the RESTORE statement. Previous messages provide details. SQLSTATE: 42000, Native Error: 3156 Error state: 4, Severity: 16 Source: Microsoft SQL Native Client Error message: File 'pardata_log' cannot be restored to 'G: pardata_log.ldf'. Use WITH MOVE to identify a valid location for the file. SQLSTATE: 42000, Native Error: 1834 Error state: 1, Severity: 16 Source: Microsoft SQL Native Client Error message: The file 'G: pardata_log.ldf' cannot be overwritten.

It is being used by database 'pardata'. SQLSTATE: 42000, Native Error: 3156 Error state: 4, Severity: 16 Source: Microsoft SQL Native Client Error message: File 'pardata' cannot be restored to 'F: pardata.mdf'. Use WITH MOVE to identify a valid location for the file. SQLSTATE: 42000, Native Error: 1834 Error state: 1, Severity: 16 Source: Microsoft SQL Native Client Error message: The file 'F: pardata.mdf' cannot be overwritten. It is being used by database 'pardata'. For more information, see Help and Support Center at So, I think maybe I should implement the Restore with Move whenever I want to using VSS restore to have Database Rename. So is this correct?

I also heard something that u can restore a database to its original location, but with a new name. Is that true? Hello, I tried to use the VSS restore to Rename the database. If I just used setselectedforRestore and then used SetRestoreOptions with New Component Name =logicalpath/new name, then the restore always fail at the post restore state. Then I looked at the eventlog.

I saw this: Sqllib error: OLEDB Error encountered calling ICommandText::Execute. Hr = 0x80040e14.

SQLSTATE: 42000, Native Error: 3013 Error state: 1, Severity: 16 Source: Microsoft SQL Native Client Error message: RESTORE DATABASE is terminating abnormally. SQLSTATE: 42000, Native Error: 3119 Error state: 1, Severity: 16 Source: Microsoft SQL Native Client Error message: Problems were identified while planning for the RESTORE statement. Previous messages provide details.

SQLSTATE: 42000, Native Error: 3156 Error state: 4, Severity: 16 Source: Microsoft SQL Native Client Error message: File 'pardata_log' cannot be restored to 'G: pardata_log.ldf'. Use WITH MOVE to identify a valid location for the file. SQLSTATE: 42000, Native Error: 1834 Error state: 1, Severity: 16 Source: Microsoft SQL Native Client Error message: The file 'G: pardata_log.ldf' cannot be overwritten. It is being used by database 'pardata'.

SQLSTATE: 42000, Native Error: 3156 Error state: 4, Severity: 16 Source: Microsoft SQL Native Client Error message: File 'pardata' cannot be restored to 'F: pardata.mdf'. Use WITH MOVE to identify a valid location for the file. SQLSTATE: 42000, Native Error: 1834 Error state: 1, Severity: 16 Source: Microsoft SQL Native Client Error message: The file 'F: pardata.mdf' cannot be overwritten. It is being used by database 'pardata'.

For more information, see Help and Support Center at So, I think maybe I should implement the Restore with Move whenever I want to using VSS restore to have Database Rename. So is this correct? I also heard something that u can restore a database to its original location, but with a new name. Is that true? See my other reply (from Friday). A scripted trace (server-side) cannot write to table. That is the way it is, quite simply.

The Profiler GUI can save to table (either while it is running, or from an open trace do Save As.). You can use SQL Server to *import* a trace file to a table (using fn_trace_gettable and SELECT INTO), but that is not the same thing as have the trace writing to a table while it is running. Tibor Karaszi, SQL Server MVP Thanks for the clear answer. Now I understand more about the way it works. Also thanks for the useful blog.

Hello, Database Mirroring Monitor Job Error We have set up two SQL Server 2005 Standard Edition serverswith database mirroring. The mirrors function and fail over without aproblem, but the Database Mirroring Monitor Job fails every time withthe following error message:Incorrect syntax near 'Virtual'.

[SQLSTATE 42000] (Error 102) Incorrect syntax near the keyword 'with'. If this statement is a common table expression or an xmlnamespaces clausec/ the previous statement must be terminated with a semicolon. [SQLSTATE 42000] (Error 319). The step failed.,00:00:01,15,319,,,,0Both SQL Servers are running SP2 with the latest patches. Hi there, i moved the database files from C to D drive on my primary site server (stopsite, detach, atach, etc). I've altered the database conform this KB:So everything is working fine, however i keep getting this error message on theSMS_HIERARCHY_MANAGER component: Microsoft SQL Server reported SQL message 15063, severity 16: [42000][15063][Microsoft][SQL Server Native Client 10.0][SQL Server]The login already has an account under a different user name. I think that this has to do with SCCM trying to configure something on the database.

But i don't know how to fix this. Database is in multiuser mode, sa is DB owner, snapshot isolation mode is on and so on. Does anyone know what SCCM tries to accomplish right before this error is raised?

I have a query that works fine if ran through MS Access, but throws a syntax error if ran through c#. The database is a dbf file so I've used Access to open it and design a simple SQL query to run a REPLACE on a given character occurance in a given field. The query is this: UPDATE ROSTER.dbf SET INSTR_NAME = REPLACE([INSTR_NAME],',); Basically all I'm doing is looking through a list of names in the INSTR_NAME field and removing any single quotes that appear (ex: O'Neil will become ONeil) In my c# app, I'm connecting to the dbf file through an ODBC connection using the dBASE driver from MS. When I run the Update query through the app I get the following error: ERROR [42000] [Microsoft][ODBC dBase Driver] Syntax error in query expression 'REPLACE([INSTR_NAME, ['], []])'. Any thoughts? Thanks in advance, Dez. I just tried it with an MS Access connection and got the same result (used MS Access driver connection string) using the SQL query I designed from within Access itself (got exact same syntax error).

I think part of the problem here is that I'm not really sure just how to do this with an ODBC connection in the first place. I'm normally programming against SQL2000/2005 and I'm not too familiar with dBase files.

I'm forced to use it because of the system that provides us with the exported data is limited in its formats (dbf being the most user-friendly). So far, I've been successful on using standard SQL syntax in my queries for SELECT statements, but now that I need to modify the data I guess I'm finding out that there may be some differences on how my approach will be (syntaxually-speaking). Any help in this will be most appreciated Thanks, Dez. When using the Add Command feature and adding Parameters to the Command list from a SQL Stored Procedure. As soon as we populated the Parameter with the desired Selection (For Example: By Sales Order) we would received the below error.

Error in compiling SQL Expression Database Connector Error:'42000:[Microsoft][ODBC SQL Server Driver][SQL Server][Incorrect sybtax near the keyword 'By'.[Database Vendor Code:156]' We found by changing the entry within the parameter field to include single quotes (for example: u2018By Sales Orderu2019) would resolve the issue and then the desired data pulled fwd onto the report. When using the Add Command feature and adding Parameters to the Command list from a SQL Stored Procedure. As soon as we populated the Parameter with the desired Selection (For Example: By Sales Order) we would received the below error. Error in compiling SQL Expression Database Connector Error:'42000:[Microsoft][ODBC SQL Server Driver][SQL Server][Incorrect sybtax near the keyword 'By'.[Database Vendor Code:156]' We found by changing the entry within the parameter field to include single quotes (for example: u2018By Sales Orderu2019) would resolve the issue and then the desired data pulled fwd onto the report.

Faz o seguinte, Conecta com um destes usurios que tu esta executando o job na ferramenta do SQL Server. Faa um backup manual exatamente como tu tem no job, mesmo caminho e nome. Desta forma vamos avaliar se o problema permisso ou com a execuo do job, eliminamos uma possibilidade. Caso funcione perfeitamente, v novamente na execuo do backup manual, crie um script da tela de backup antes de executar e crie um job novo com este script.

Na teoria se funcionou manualmente e com este usurio no Management no deve ter problemas depois com o Job. Me avisa se funcionar ou no. Hi all, I got the DB restore job failed and error 'Executed as user: sa. File 'Executed as user: sa.

Processed 2032040 pages for database prod', file 'prod_Data' on file 1. [SQLSTATE 01000] (Message 4035) Processed 51 pages for database 'prod', file 'prod_Log' on file 1. [SQLSTATE 01000] (Message 4035) Device activation error. The physical file name 'z: sqldata prod_Data.MDF' may be incorrect. [SQLSTATE 42000] (Error 5105) RESTORE could not start database 'prod'.

[SQLSTATE 42000] (Error 3167) RESTORE DATABASE is terminating abnormally. [SQLSTATE 42000] (Error 3013). The step failed.After that, I needed to restore the DB manually and overwrite the exsiting DB. This is a daily restore job and failed with the same error occasionally. Any idea for this error? Thanks in advance! We us a stored procedure, run via a SQL Server Agent Job, to bulk insert flat files using a *.fmt file.

Every few runs, the bulk insert fails with the below error. Error: Cannot bulk load. Invalid destination table column number for source column 1 in the format file C: FormatFile.fmt. [SQLSTATE 42000] (Error 4828).

The step failed.,00:00:,,,,0 A re-run of the same flat file and format file results in a successful bulk insert. I have run the following tests to reproduce the behavior in our lab but have been unsuccessful. Test Scenarios: ============ 1. Modified permissions to the C: FormatFile.fmt to prevent read access. An error is thrown during the bulk insert attempt but not the same that is seen in production. Error from test: ~~~~~~~~~~ Cannot bulk load because the file C: FormatFile.fmt could not be opened. Operating system error code 5(Access is denied.).

[SQLSTATE 42000] (Error 4861). The step failed. Renamed destination table tbBulkLoadData to tbBulkLoadData01 and ran the bulk insert job.

An error is thrown during the bulk insert attempt but not the same that is seen in production. Error from test: ~~~~~~~~~~ Cannot find the object tbBulkLoadData because it does not exist or you do not have permissions. [SQLSTATE 42S02] (Error 4701). The step failed. Put together a Python script to set a file lock on the C: FormatFile.fmt file and ran the bulk insert job. An error is thrown during the bulk insert attempt but not the same that is seen in production. Error from test: ~~~~~~~~~~ Cannot bulk load because the file C: FormatFile.fmt could not be opened.

Operating system error code 32(The process cannot access the file because it is being used by another process.). [SQLSTATE 42000] (Error 4861). The step failed.

Set exclusive locks on the tbBulkLoadData table without committing the transaction and then ran the bulk insert job. The job just waits until the previous transaction containing the locks is committed. ============ Does anyone have any additional ideas?

I'm certainly open to suggestions. This would appear to be the same issue reported under. Which I have also commented on. Thanks in advance for any input. I've a SProc that uses Insert into TableName select col1, col2 FROM OPENROWSET('Microsoft.ACE.OLEDB.12.0', 'Excel 12.0; HDR=NO; IMEX=1; Database=C: test.xls', 'Sheet1$') The SProc runs fine from the Query Analyzer, but if I try to run it via SSIS Package or SS Job Agent, it produces the following error: Message Executed as user: DOMAIN sqll01_sql.

The OLE DB provider Microsoft.ACE.OLEDB.12.0 for linked server (null) reported an error. The provider did not give any information about the error. [SQLSTATE 42000] (Error 7399) Cannot initialize the data source object of OLE DB provider Microsoft.ACE.OLEDB.12.0 for linked server (null).

[SQLSTATE 42000] (Error 7303). The step failed. Any help is appreciated.GBM.

You can enable logging of SQL Job to create detailed log which woudl also show the relevant error message.Balmukund Lakhani Please mark solved if I've answered your question, vote for it as helpful to help other user's find a solution quicker -------------------------------------------------------------------------------- This posting is provided AS IS with no warranties, and confers no rights. -------------------------------------------------------------------------------- My Blog: Team Blog: http://blogs.msdn.com/sqlserverfaq. Hi RoyalM, The two causes of this problem are related.

The more frequent cause is listed first: More files are open than the memory cache manager can handle. As a result, the cache manager has exhausted the available paged pool memory. The backup program has tried to back up a file whose size is larger than the backup API can access on that version of the operating system. This has the same result (that is, the paged pool is exhausted). For more information, please refer to: Also see: Hope this helps, MaggiePlease remember to mark the replies as answers if they help and unmark them if they provide no help.

This can be beneficial to other community members reading the thread.